Grandstream Networks UCM6202 User Manual page 264

Paging Prefix
Intercom Prefix
Blacklist Add
Blacklist Remove
Call Pickup on Ringing
Pickup In-call
Pickup Extension
Direct Dial Voicemail Prefix
Direct Dial Mobile Phone Prefix
•
Default Code: *81
•
To page an extension, enter the code followed by the extension
number.
•
Default Code: *80
•
To intercom an extension, enter the code followed by the
extension number.
•
Default Code: *40
•
To add a number to blacklist for inbound route, dial *40 and
follow the voice prompt to enter the number.
•
Default Code: *41
•
To remove a number from current blacklist for inbound route,
dial *41 and follow the voice prompt to remove the number.
•
Default Code: **
•
To pick up a call for any extension xxxx, enter the code followed
by the extension number xxxx.
•
Default Code: *45 (Disabled by default).
•
If "Pickup In-call" feature is enabled, only the extensions added
in "Allowed to seamless transfer" in the extension's Seamless
Transfer Privilege Control List" can pick up the call.
•
Default Code: *8
•
This code is for the pickup group, which can be assigned for
each extension on the extension configuration page.
•
If there is an incoming call to an extension, the other extensions
within the same pickup group can dial *8 directly to pick up the
call.
•
Default Code: *
•
This code is for the user to directly dial or transfer to an
extension's voicemail.
•
For example, directly dial *5000 will have to call go into the
extension 5000's voicemail. If the user would like to transfer the
call to the extension 5000's voicemail, enter *5000 as the
transfer target number.
•
Default Code: *88
•
If you have the permission to call mobile phone number, use
this prefix plus the extension number can dial the mobile phone
number of this extension directly.
UCM6200 Series User Manual
P a g e | 263