Grandstream Networks UCM6202 User Manual page 137

Enable Voicemail Enable Voicemail for the user. The default setting is "Yes".
Enable WebRTC
Enable WebRTC support.
Support
Configure the SIP/IAX password for the users. Three options are available to create
password for the batch of extensions.
•
SIP/IAX Password
•
•
Configure Voicemail password (digits only) for the users.
•
Voicemail
Password
•
•
Configure CallerID Number when adding Batch Extensions.
•
CallerID Number
•
Configure the number of seconds to ring the user before the call is forwarded to
voicemail (voicemail is enabled) or hang up (voicemail is disabled). If not specified,
the default ring timeout is 60 seconds on the UCM6200, which can be configured in
the
PromptCustom Prompt: General Preference. The valid range is between 5
Ring Timeout
seconds and 600 seconds.
Note:
If the end point also has a ring timeout configured, the actual ring timeout used is the
shortest time set by either device.
Enable automatic recording for the calls using this extension. The default setting is
Auto Record disabled. The recording files can be accessed under Web GUICDRRecording
Files.
Skip Voicemail
When user dials voicemail code, the password verification IVR is skipped. If enabled,
Password
this would allow one-button voicemail access. By default this option is disabled.
Verification
Select which Music On Hold class to suggest to extensions when putting them on
Music On Hold
hold.
User Random Password.
A random secure password will be automatically generated. It is recommended
to use this password for security purpose.
Use Extension as Password.
Enter a password to be used on all the extensions in the batch.
User Random Password.
A random password in digits will be automatically generated. It is recommended
to use this password for security purpose.
Use Extension as Password.
Enter a password to be used on all the extensions in the batch.
Use Extension as Number
Users can choose to use the extension number as CallerID
Use as Number
Users can choose to set a specific number instead of using the extension number.
global ring timeout setting
UCM6200 Series User Manual
under Web GUIPBX SettingsVoice
P a g e | 136