Table 53: Create New Iax Trunk - Grandstream Networks UCM6202 User Manual

SRTP Enable SRTP for the VoIP trunk. The default setting is "No".
If enabled, the local UCM6200 will automatically provide and update the local
LDAP contacts to the remote UCM6200 SIP peer trunk. In order to ensure
Sync LDAP Enable
successful synchronization, the remote UCM6200 peer also needs to enable this
option on the SIP peer trunk. The default setting is "No".
This is the password used for LDAP contact file encryption and decryption during
Sync LDAP
the LDAP sync process. The password must be the same on both UCM6200 peers
Password
to ensure successful synchronization.
Sync LDAP Port Configure the TCP port used LDAP sync feature between two peer UCM6200.
Specify an outbound rule for LDAP sync feature. The UCM6200 will automatically
LDAP Outbound Rule
modify the remote contacts by adding prefix parsed from this rule.
Specify the prefix for LDAP sync feature. The UCM6200 will automatically modify
LDAP Dialed Prefix
the remote contacts by adding this prefix.
CC Settings
If enabled, the system will automatically alert the user when a called party is
Enable CC
available, given that a previous call to that party failed for some reason.
Configure the maximum number of CCSS agents which may be allocated for this
CC Max Agents channel. In other words, this number serves as the maximum number of CC
requests this channel can make. The minimum value is 1.
Configure the maximum number of monitor structures which may be created for
this device. In other words, this number tells how many callers may request CC
CC Max Monitors
services for a specific device at one time.
The minimum value is 1.
Select the VoIP trunk type.
•
Type
•
Configure a unique label to identify this trunk when listed in outbound rules,
Provider Name
inbound rules etc.
Host Name Configure the IP address or URL for the VoIP provider's server of the trunk.
If enabled, the trunk CID will not be overridden by extension's CID when the
Keep Trunk CID
extension has CID configured. The default setting is "No".
Enter the username to register to the trunk from the provider when "Register IAX
Username
Trunk" type is selected.
Enter the password to register to the trunk from the provider when "Register IAX
Password
Trunk" type is selected.
Disable This Trunk If selected, the trunk will be disabled.

Table 53: Create New IAX Trunk

Peer IAX Trunk
Register IAX Trunk
UCM6200 Series User Manual
P a g e | 168