Grandstream Networks UCM6202 User Manual page 185

Select the default destination for the inbound call.
•
•
•
•
•
•
•
•
•
Default Destination
•
•
•
•
Configure the number of digits to be stripped from the beginning of the DID. This
Strip
option shows up only when "By DID" is selected.
Configure the number of digits to be prepended to an inbound DID pattern, with
Prepend
strip taking precedence over prepend.
This option shows up only when "By DID" is selected. If enabled, the external users
Dial Trunk dialing in to the trunk via this inbound route can dial outbound call using the
UCM6200's trunk.
This option shows up only when "By DID" is selected. This controls the destination
that can be reached by the external caller via the inbound route. The DID
destination are:
•
•
•
•
DID Destination
•
•
•
•
•
•
Extension
Voicemail
Conference Room
Queue
Ring Group
Paging/Intercom
Voicemail Group
Fax
DISA
IVR
Dial by Name
External Number
By DID
When "By DID" is used, the UCM6200 will look for the destination based on
the number dialed, which could be local extensions, conference, call queue,
ring group, paging/intercom group, IVR, voicemail groups and Fax extension
as configured in "DID destination". If the dialed number matches the DID
pattern, the call will be allowed to go through.
Extension
Conference
Call Queue
Ring Group
Paging/Intercom Groups
IVR
Voicemail Groups
Fax Extension
Dial by Name
All
UCM6200 Series User Manual
P a g e | 184