Table 74: Fax/T.38 Settings - Grandstream Networks UCM6202 User Manual

Enable Error
Correction Mode
Maximum Transfer
Rate
Minimum Transfer Rate
Max Concurrent
Sending Fax
Fax Queue Length
Fax Header Information
Default Email Address
Template Variables

Table 74: FAX/T.38 Settings

Configure to enable Error Correction Mode (ECM) for the Fax.
The default setting is "Yes".
Configure the maximum transfer rate during the Fax rate negotiation.
The possible values are 2400, 4800, 7200, 9600, 12000 and 14400.
The default setting is 14400.
Configure the minimum transfer rate during the Fax rate negotiation. The
possible values are 2400, 4800, 7200, 9600, 12000 and 14000. The default
setting is 2400.
Configure the concurrent fax that can be sent by UCM6200. Two mode "Only"
and "More" are supported.
•
Only
Under this mode, the UCM6200 allows only single user to send fax at a time.
•
More
Under this mode, the UCM6200 supports multiple concurrent fax sending by
the users.
By default, this option is set to "only".
Configure the maximum length of Fax Queue from 6 to 10.
The default setting is 6.
Adds fax header into the fax file.
Configure the Email address to send the received Fax to if user's Email address
cannot be found.
Note:
The extension's Email address or the Fax's default Email address needs to be
configured in order to receive Fax from Email. If neither of them is configured,
Fax will not be received from Email.
Fill in the "Subject:" and "Message:" content, to be used in the Email when
sending the Fax to the users.
The template variables are:
•
${CALLERIDNUM} : Caller ID Number
•
${CALLERIDNAME} : Caller ID Name
•
${RECEIVEEXTEN} : The extension to receive the Fax
•
${FAXPAGES} : Number of pages in the Fax
•
${VM_DATE} : The date and time when the Fax is received
UCM6200 Series User Manual
P a g e | 236