Set Time Manually; Ntp Server; Office Time; Figure 44: Set Time Manually - Grandstream Networks UCM6202 User Manual

Set Time Manually

To manually set the time on the UCM6200, go to Web GUISystem SettingsTime SettingsSet Time
Manually. The format is YYYY-MM-DD HH:MI:SS.

Figure 44: Set Time Manually

----------------------------------------------------------------------------------------------------------------------------- ----------------------
Note:
Manually setup time will take effect immediately after saving and applying change in the Web GUI. If users would
like to reboot the UCM6200 and keep the manually setup time setting, please make sure "Remote NTP Server",
"Enable DHCP Option 2" and "Enable DHCP Option 42" options under Web GUISettingsTime
SettingsAuto Time Updating page are unchecked or set to empty. Otherwise, time auto updating settings in
this page will take effect after reboot.
----------------------------------------------------------------------------------------------------------------------------- ---------------------

NTP Server

The UCM6200 can be used as a NTP server for the NTP clients to synchronize their time with. To configure the
UCM6200 as the NTP server, set "Enable NTP server" to "Yes" under Web GUISystem SettingsTime
SettingsNTP Server. On the client side, point the NTP server address to the UCM6200 IP address or host
name to use the UCM6200 as the NTP server.

Office Time

On the UCM6200, the system administrator can define "office time", which can be used to configure time
condition for extension call forwarding schedule and inbound rule schedule. To configure office time, go to Web
GUISystem SettingsTime SettingsOffice Time. Click on "Create New Office Time" to create an office
time.
P a g e | 74
UCM6200 Series User Manual