Enable automatic recording for the calls using this extension. The default setting is
Auto Record
disabled. The recordings can be accessed under Web GUICDRRecording Files.
•
•
Skip Trunk Auth
•
Time Condition for
If 'Skip Trunk Auth' is set to 'By Time', select a time condition during which users can
Skip Trunk Auth
skip entering password when making outbound calls.
Dial Trunk
Configure personal password when making outbound calls via trunk.
Password
Support Hot-
If enabled, SIP Password will accept only alphabet characters and digits. Auth ID will
Desking Mode
be changed to the same as Extension.
Enable LDAP
If enabled, the extension will be added to LDAP Phonebook PBX list.
Enable WebRTC
Enable registration and call from WebRTC.
Support
Specify which Music On Hold class to suggest to the bridged channel when putting
Music On Hold
them on hold.
Call Duration Limit
The maximum duration of call-blocking.
Maximum Call
The maximum call duration (in seconds). The default value 0 means no limit.
Duration
Custom
Call-info
If enabled, when a call is sent to this extension from UCM, the SIP INVITE message
for Auto Answer
will contain a Call-info header indicating auto answer.
Specific Time
Time Condition
Click to add Time Condition to configure specific time for this extension.
Create New IAX Extension
The UCM6200 supports Inter-Asterisk eXchange (IAX) protocol. IAX is used for transporting VoIP telephony
sessions between servers and terminal devices. IAX is like SIP but also has its own characteristic. For more
information, please refer to RFC 5465.
To manually create new IAX user, go to Web GUIExtension/TrunkExtensions. Click on "Add" and a new
dialog window will show for users which need to make sure first to select the extension type to be IAX Extension
before proceeding to fill in the extension information. The configuration parameters are as follows.
If set to "yes", users can skip entering the password when making outbound calls.
If set to "By Time", users can skip entering the password when making outbound
calls during the selected time condition.
If set to "No", users will be asked to enter the password when making outbound
calls.
Table 34: SIP Extension Configuration ParametersSpecific Time
UCM6200 Series User Manual
P a g e
|
126