The WakeUp service can be used to schedule a reminder or wake up calls to any valid destination. This service
is available on the UCM6200 as a separated module.
There are three ways to set up Wakeup Service:
•
Using admin login
•
Using user portal
•
Using feature code
WakeUp Service using admin login
1. Login to the UCM as admin.
2. WakeUp service can be found under Web GUIValue-added FeaturesWakeup Service, click
on
3. Click
WAKEUP SERVICE
to create a new wakeup service. The following window will pop up.
Figure 202: Create New Wakeup Service
and
to apply the changes.
UCM6200 Series User Manual
P a g e
|
299