Enable Zero Config
Enable Automatic
Configuration Assignment
Automatically Assign
Extension
Figure 63: Auto Provision Settings
Table 22: Auto Provision Settings
Enable or disable the zero config feature on the PBX. The default setting
is enabled.
By default, this is disabled. If disabled, when SIP device boots up, the
UCM6200 will not send the SIP device the URL to download the config file
and therefore the SIP device will not be automatically provisioned by the
UCM6200.
Note:
When disabled, SIP devices can still be provisioned by manually sending
NOTIFY from the UCM6200 which will include the XML config file URL for
the SIP device to download.
If enabled, when the device is discovered, the PBX will automatically
assign an extension within the range defined in "Zero Config Extension
Segment" to the device. The default setting is disabled.
UCM6200 Series User Manual
P a g e
|
90