Name
Extension
Type
Custom Prompt
Page/Intercom Group
Members
•
Click on
to edit the paging/intercom group.
•
Click on
to delete the paging/intercom group.
•
Click on "Paging/Intercom Group Settings" to edit Alert-Info Header. This header will be included in the SIP
INVITE message sent to the callee in paging/intercom call.
•
The UCM6200 has pre-configured paging/intercom feature code. By default, the Paging Prefix is *81 and
the Intercom Prefix is *80. To edit page/intercom feature code, click on "Feature Codes" in the
"Paging/Intercom Group Settings" dialog. Or users could go to Web GUICall FeaturesFeature Codes
directly.
Table 70: Paging/Intercom Group Configuration Parameters
Configure paging/intercom group name.
Configure the paging/intercom group extension.
Select "2-way Intercom" or "1-way Page".
This option is to set a custom prompt for a paging/intercom group to announce
to caller. Click on 'Prompt', it will direct to the page PBX SettingsVoice
PromptCustom Prompt, where users could record new prompt or upload
prompt files.
Select available users from the left side to the paging/intercom group member
list on the right.
Figure 141: Page/Intercom Group Settings
UCM6200 Series User Manual
P a g e
|
220