Grandstream Networks UCM6202 User Manual page 265

Call Completion Request
Call Completion Cancel
Enable Spy
Listen Spy
Whisper Spy
Barge Spy
Wakeup Service
PMS Wakeup Service
Update PMS Room Status
Presence Status
•
Default Code: *11
•
This code is for the user who wants to use Call Completion to
complete a call.
•
Default Code: *12
•
This code is for the user who wants to cancel Call Completion
request.
Check this box to enable spy feature codes. Disabled by default.
•
Default Code: *54 ("Enable Spy" needs to be checked)
•
This is the feature code to listen in on a call to monitor
performance. Monitor's line will be muted, and neither party will
hear from the monitor's extension.
•
Default Code: *55 ("Enable Spy" needs to be checked)
•
This is the feature code to speak to one side of the call (for
example, whisper to employees to help them handle a call).
Only one side will be able to hear from the monitor's extension.
•
Default Code: *56 ("Enable Spy" needs to be checked)
•
This is the feature code to join in on the call to assist both
parties.
•
Default Code: *36
•
Dial this code to access UCM wakeup service, you can add,
update, activate or deactivate wakeup service.
•
Default Code: *35
•
Dial this code to access UCM PMS wakeup service, you can
add, update, activate or deactivate PMS wakeup service.
•
Default Code: *23
•
Use this code with maid code to update PMS room status.
Choose the status to set after hearing the prompt, for example:
for maid 001 dial *23001 and then 1 after hearing the prompt.
•
Dial this code to set the presence status of the extension.
•
Possible options are:
1:"unavailable"
2:"available"
3:"away"
4:"chat
5:"dnd
6:"userdef"
UCM6200 Series User Manual
P a g e | 264