Disconnect
Call Park
Audio Mix Record
DND/Call Forward
Do Not Disturb (DND) Activate
Do Not Disturb (DND) Deactivate
Call Forward Busy Activate
Call Forward Busy Deactivate
Call Forward No Answer Activate
Call Forward No Answer
Deactivate
•
Default code: *0
•
Enter the code during active call. It will disconnect the call.
•
Options:
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.
•
Default code: #72
•
Enter the code during active call to park the call.
•
Options:
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.
•
Default code: *3
•
Enter the code followed by # or SEND to start recording the
audio call and the UCM6200 will mix the streams natively on the
fly as the call is in progress.
•
Options:
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.
•
Default code: *77
•
Default code: *78
•
Default Code: *90
•
Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.
•
Default Code: *91
•
Default Code: *92
•
Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.
•
Default Code: *93
UCM6200 Series User Manual
P a g e
|
261