Call Recording; Figure 176: Enable/Disable Feature Codes - Grandstream Networks UCM6202 User Manual

The UCM6200 also allows user to one click enable / disable specific feature code as shown below:

Call Recording

The UCM6200 allows users to record audio during the call. If "Auto Record" is turned on for an extension, ring
group, call queue or trunk, the call will be automatically recorded when there is established call with it. Otherwise,
please follow the instructions below to manually record the call.
1. Make sure the feature code for "Audio Mix Record" is configured and enabled.
2. After establishing the call, enter the "Audio Mix Record" feature code (by default it's *3) followed by # or
SEND to start recording.
3. To stop the recording, enter the "Audio Mix Record" feature code (by default it's *3) followed by # or SEND
again. Or the recording will be stopped once the call hangs up.
4. The recording file can be retrieved under Web GUICDR. Click on
click on to download the recording file.

Figure 176: Enable/Disable Feature codes

UCM6200 Series User Manual
to show and play the recording or
P a g e | 265