Interface Settings; Table 95: Pbx Interface Settings; Figure 183: Fxs Ports Signaling Preference; Figure 184: Fxo Ports Acim Settings - Grandstream Networks UCM6202 User Manual

Analog Hardware
The analog hardware (FXS port and FXO port) on the UCM6200 will be listed in this page. Click on
signaling preference for FXS port or configure ACIM settings for FXO port.
Select "Loop Start" or "Kewl Start" for each FXS port. And then click on "Update" to save the change.
For FXO port, users could manually enter the ACIM settings by selecting the value from dropdown list for each
port. Or users could click on "Detect" and choose the detection algorithm, two algorithms exists (ERL, Pr) for the
UCM6200 to automatically detect the ACIM value. The detecting value will be automatically filled into the settings.
Tone Region

INTERFACE SETTINGS

Figure 183: FXS Ports Signaling Preference

Figure 184: FXO Ports ACIM Settings

Table 95: PBX Interface Settings

Select country to set the default tones for dial tone, busy tone, ring tone and
etc to be sent from the FXS port. The default setting is "United States of
America (USA)".
UCM6200 Series User Manual
to edit
P a g e | 282