Deleting A Recording; Snapshot Mode; Opening A Previously Saved Snapshot - AEMC 8335 User Manual

6.4.4 Deleting a Recording

1. Press the
2. Select the recording to be deleted using the ▲ or ▼ button, then press the
button to confirm deletion.
To leave this screen without deleting any alarm, press the

6.5 Snapshot Mode

This button allows 50 snapshots to be saved for future recall and evaluation.
• Press the
• The
is successful.
• This icon is replaced by
record the display.
• The snapshot will record all measurements present at the input of the
meter when you press the
These screens can be downloaded to a computer using DataView

6.5.1 Opening a Previously Saved Snapshot

• A short press (about 1s) on the
shots that have been saved.
• The small icon to the left of each snapshot (date and time) tells you what type of
data was stored.
Power Quality Analyzer Model 8335
icon's yellow button
button (for about 3s) to capture the current display.
icon is displayed in the top left corner as soon as the operation
if there is no space left in the memory to
button.
button gives access to the menu of snap-
Figure 6-15
button.
®
67