The
button can take up to 50 screen snapshots and display recorded snapshots. Saved snapshots can then be transferred to a
computer running the DataView PowerPad III Control Panel.
11.1. SCREEN SNAPSHOTS
Press
for approximately 3 seconds to take a snapshot of any screen. When the snapshot is taken, the icon of the active mode
(
,
,
,
,
,
The instrument can record up to 50 screen snapshots. If you attempt to record an additional snapshot, the instrument informs you that
snapshots must be deleted by displaying the
11.2. HANDLING SCREEN SNAPSHOTS
To enter screen snapshot mode, briefly press the
Available image memory. The
black bar represents memory
used and the white bar
represents memory available.
Icons for browsing screen
11.2.1. VIEWING A SNAPSHOT
To view a snapshot, select it in the list of screen snapshots using the , , and buttons. The date and time of the selected
snapshot are bolded.
Press to display the selected snapshot. The
snapshot was taken (
,
Press
to return to the list of screen snapshots.
11.2.2. DELETING A SNAPSHOT
To delete a snapshot, select it in the list of screen snapshots using the , , and buttons. The date and time of the selected
snapshot are bolded.
Press the
button and validate by pressing . The snapshot is removed from the list.
To cancel the deletion, press
11.
SCREEN SNAPSHOT MODE
,
) at the top of the display unit is replaced by the
icon in place of
button. The instrument then displays a list of recorded screen snapshots.
pages.
icon is displayed, alternating with the icon for the mode that was active when the
,
,
,
,
,
instead of .
.
Figure 11-1
).
79
icon. You can then release the
List of saved snapshots. Each icon
represents the type of screen
recorded, followed by the date and
time of the snapshot.
Display list of screen snapshots.
Delete a screen snapshot.
button.