Digital Variables - JUMO mTRON T Operating Manual

6 Configuration
6.3.3

Digital variables

64 digital variables are available (digital variable 1 to 64).
Setup dialog
Parameters
Parameter
Retain
Signal suppress
Inverting
Level suppress
68
Selection/settings
Retains the binary value in the event of power off
No
Yes
Signal to activate signal suppression
Inactive
Module (source of signal)
Inversion of the input signal
Normal
Inverse
Input signal level during active signal suppression
Inactive
Active
Description
Value is set to 0 after power on.
Value is retained.
No signal suppression
Signal suppression by a signal (high
active) that must be selected in the fol-
lowing field (digital selector).
Not inverted
Inverted
Low level (0)
High level (1)