Integer Plc Output Texts - JUMO mTRON T Operating Manual

8.5

Integer PLC output texts

To make it easier to work with the PLC, the PLC integer outputs (system I/O buffer variables)
are assigned representative names. These names are specified to the CoDeSys programming
system by the setup program.
Setup dialog
Parameters
Parameter
Texts for block 1
to
Texts for block 12
Heading
Text output 1
to
Text output 24
8 Configuration – in setup program only
Selection/settings
Select a block
Use the ">" button to open a window in
which the text can be entered or edited.
Enter text or use text provided (edit if
necessary)
Description
A block consists of a text for the heading
and up to 24 texts for the outputs.
Some headings and texts are already
specified but can be changed if neces-
sary. For example, block 1 contains the
texts for program generator 1.
Heading in the NV connecting list
Up to four different languages can be
managed (language 1 to 4).
Texts for output 1 to output 24
Up to four different languages can be
managed (tab 1 to 4).
123