JUMO mTRON T Operating Manual page 109

Setup dialog – Process screen – Analog signals
Parameters
The overview pane shows the eight analog signals of the process screen with their current set-
tings. Before changing the settings of an analog signal, select the signal in the overview pane.
Parameter
Analog signal 1 to
8
Name analog 1 to
8
Color analog sig-
nal 1 to 8
Unit analog signal
1 to 8
Comma anal.
signal 1 to 8
Selection/settings
Analog signal that is displayed on the process screen.
Inactive
Module (source of the analog signal)
Use default name or edit text.
(Max. 16 characters)
Use default color or select another color
from the list (256 colors).
Max. 5 characters (%)
Auto
XXXX.
XXX.X
XX.XX
X.XXX
6 Configuration
Description
No signal selected.
The analog signal of the relevant mod-
ule must be selected in the adjacent
field.
Name of the analog signal on the pro-
cess screen
Color in which the analog signal is dis-
played on the process screen.
Unit of the analog signal on the process
screen
Number of decimal places is selected
automatically.
No decimal places
One decimal place
Two decimal places
Three decimal places
109