JUMO mTRON T Operating Manual page 51

Generator screen – program channel selection in manual mode
This screen appears when the button (3) for changing the setpoint values and operating con-
tacts is pushed.
Generator screen – setting the setpoint values and operating contacts in manual mode
(1) Setpoint value 1 to 4 in selected program
channel 1
(3) 16 operating contacts in the selected pro-
gram channel 1 (contact 1 = right)
(4)
(2) Upper limit of the tolerance band (for set-
point value 1)
(4) Lower limit of the tolerance band (for set-
point value 1)
5 Operation
(1)
(2)
(3)
51