NOTE!
An active connection between the setup program and the central processing unit is required
to configure the parameters described in this section.
10.1
Ethernet
These settings are required for the setup program to communicate with the central processing
unit via LAN and for the Web server function of the central processing unit.
Up to five PCs can be connected to a central processing unit at the same time.
Setup dialog
Parameters
Parameter
DHCP
?
IP-address
?
Subnet mask
?
Standard
gateway
?
Selection/settings
ON
OFF
0.0.0.0 to
223.223.223.1 to
255.255.255.255
0.0.0.0 to
255.255.255.0 to
255.255.255.255
0.0.0.0 to 255.255.255.255
10 Online parameters
Description
The central processing unit takes its IP
address from the DHCP server.
The IP address of the central processing
unit must be assigned manually.
Manual allocation of the IP address for
the central processing unit (active if
DHCP = OFF)
The IP address may need to be
requested by the responsible adminis-
trator.
Manual setting of the subnet mask
(active if DHCP = OFF)
The structure of the subnet mask may
need to be requested from the adminis-
trator responsible.
Manual setting of the IP address of the
standard gateway (router) (active if
DHCP = OFF)
The IP address may need to be
requested from the administrator
responsible.
149