6.11.5
Manual mode setpoints
Specific values can be specified for each of the program channels for manual mode. This re-
lates to all setpoint values, the tolerance band, and the 16 operating contacts.
These values are also used if the program generator has been configured as a fixed-setpoint
generator.
Setup dialog
Parameters
Parameter
Program channel 1 to 3 (setpoint values and operating contacts in manual mode)
Setpoint 1
Setpoint 2
Setpoint 3
Setpoint 4
Tolerance min.
Tolerance max.
Contact
1 to 16
Selection/settings
-99999 to 0 to +99999
-99999 to 0 to +99999
-99999 to 0 to +99999
-99999 to 0 to +99999
-99999 to 0 to +99999
-99999 to 0 to +99999
Not selected (empty)
Selected (checkmark)
6 Configuration
Description
Setpoint value 1
Setpoint value 2
Setpoint value 3
Setpoint value 4
Minimum value of the tolerance band
Maximum value of the tolerance band
Operating contact not active
Operating contact active
101