12 Appendix; Technical Data; Interfaces; Electrical Data - JUMO mTRON T Operating Manual

12.1

Technical data

12.1.1

Interfaces

USB device
Connector designation
Connector type
Number
Application
Max. current
System bus Out
Connector designation
Connector type
Number
Application
Connection cable
Cable length
Ethernet
Connector designation
Connector type
Number
Application
Protocol
Transfer rate
RS232 or RS422/485 (serial interfaces)
Connector designation
Connector type
Number
Application
Protocol
Transfer rate
12.1.2

Electrical data

Voltage supply
Connection
Voltage
Residual ripple
Current consumption
Power consumption
Setup
Mini-B
1
Connection to a PC (setup program)
100 mA
Bus Out
RJ45
1
Connection of a router module or a multifunction panel
Network cable (patch or crossover cable), at least CAT5 (S/FTP)
Up to 100 m
LAN
RJ45
1
Communication with PC (setup program, web server), e-mail server,
and Modbus master/slave
TCP/IP, HTTP, DHCP, SMTP+POP3, Modbus/TCP
10 Mbit/s, 100 Mbit/s
Depending on the device type
Com1 and Com2
D-Sub
2
Fieldbus applications, communication via modem with a PC (setup
program) or with an e-mail server
Modbus RTU (master or slave);
PROFIBUS-DP (slave, Com2 only)
Modbus: 9600 Bd, 19200 Bd, 38400 Bd;
PROFIBUS: max. 12 Mbit/s
At the front (removable 2-pole terminal strip with Push-In technol-
ogy)
DC 24 V +25/-20 % SELV
5 %
Max. 350 mA (at DC 19.2 V)
Current consumption of lined-up modules also has to be considered
(see „Hardware configuration" in the setup program)!
Max. 7 W

12 Appendix

163