JUMO mTRON T Operating Manual page 95

Parameter Selection/settings
Actual value dif- 0 to 100 %
ference
Start with time The program can be started at a specific time (entry of date and time during oper-
ation).
No
Yes
End signal 0 to 32767 s
Start program Program is started with a digital signal.
Inactive
Module (source of signal)
Stop program Program is stopped with a digital signal.
Inactive
Module (source of signal)
Abort program Program is aborted with a digital signal.
Inactive
Module (source of signal)
Previous section A digital signal triggers changeover to previous section.
(as of system ver-
Inactive
sion 02)
Module (source of signal)
Next section A digital signal triggers changeover to next section.
Inactive
Module (source of signal)
6 Configuration
Description
The maximum admissible difference
between the actual value before and
after the power failure for the program to
continue running.
Immediate program start (e.g. by opera-
tion or digital signal)
Program start at a specific time
Length of the program end signal
No signal selected.
The signal must be selected in the fol-
lowing field (digital selector).
No signal selected.
The signal must be selected in the fol-
lowing field (digital selector).
No signal selected.
The signal must be selected in the fol-
lowing field (digital selector).
No signal selected.
The signal must be selected in the fol-
lowing field (digital selector).
No signal selected.
The signal must be selected in the fol-
lowing field (digital selector).
95