JUMO mTRON T Operating Manual page 128

8 Configuration – in setup program only
Process contacts: Setup dialog (as of system version 03)
Parameters
Parameters
Function
?
Control function
time
?
ON pulse time
?
OFF pause time
?
128
Selection/settings
Activation and function of the process contact
Inactive
Direct
Switch-on delayed
Switch-off delayed
Switch-on advanced
0 to 99999 s
0 to 99999 s
0 to 99999 s
Description
The process contact is inactive.
The process contact is active during the
process step (no special switching
behavior).
The process contact is activated with
delay (delay time = control function time
T ).
S
The process contact is deactivated with
delay (T , see above).
S
The process contact is activated before
the start of the process step (T
above).
The control function time T
period of the switch-on or switch-off
delay or of the switching advance.
The ON pulse time T
ON
pulse time T define a pulse action of
OFF
the process contact while the contact is
active.
, see
S
is the time
S
and the OFF