Process Steps (As Of System Version 02) - JUMO mTRON T Operating Manual

8 Configuration – in setup program only
8.8

Process steps (as of system version 02)

In a process step, requirements for creating the program with the process engineering program
editor are defined (extra code 228 required). There a certain process step is assigned to each
program section. All process steps which have been assigned to the allocated program gener-
ator are available for this purpose. As a result, the requirements defined in the process step
apply to the program section in question. This means that only the admissible setpoint values
are used and that the section time lies within the predefined limits.
Furthermore, in a process step 16 process contacts are available to control PLC functions (not
to be confused with the operating contacts of the program generators). As of system version
03, the function of the process contacts can be configured.
Setup dialog
Parameter
Parameter
No.
Number
Process step
name
Min. section time 00:00:00 to 99:59:59 s
Max. section time 00:00:00 to 99:59:59 s
126
Selection/settings
Select process step from 1 to 100 to be
programmed (starting with process step
1)
Process step 01 to 100
Enter name (max. 21 characters) or use
default name.
Description
Number of the process step
Free choice of name for the process
step
Use the ">" button to open a window in
which the text can be entered in up to
four national languages.
Minimum admissible value when enter-
ing the section time in the program edi-
tor
Maximum admissible value when enter-
ing the section time in the program edi-
tor