Case And Ambient Conditions; Approval/Approval Marks - JUMO mTRON T Operating Manual

12 Appendix
Conductor cross section (voltage supply)
Wire or strand without ferrule
Strand with ferrule
2 x strand with twin ferrule
with plastic collar
Stripping length
Electrical safety
Electromagnetic compatibility
Interference emission
Interference immunity
Data backup
Buffer battery service life
12.1.3

Case and ambient conditions

Case type
Dimensions (W × H × D)
Weight (fully equipped)
Protection type
Ambient temperature range
Storage temperature range
Resistance to climatic conditions
Site altitude
Mechanical ambient conditions
1
Test conditions are listed in the System Descripton B 705000.8.
12.1.4

Approval/approval marks

Approval mark Testing agency
c UL us Underwriters Laborato-
ries
GL – hardware Germanischer Lloyd
GL – software
164
Min. 1.5 mm
Min. 1.5 mm
1.5 mm
10 mm
Acc. to EN 61010-1
Overvoltage category III, pollution degree 2
Acc. to EN 61326-1
Class A – only for industrial use –
To industrial requirements
Buffered RAM
Approx. 10 years (Lithium battery)
Metal case for DIN rail mounting in the control cabinet (indoor use);
DIN rail acc. to DIN EN 60715, 35 mm x 7.5 mm x 1 mm
135 mm × 101 mm × 67.1 mm (without connection elements)
Approx. 670 g
IP20, acc. to DIN EN 60529
-20 to +55 °C
-40 to +70 °C
Relative humidity ≤ 90 % annual average without condensation (cli-
matic class 3K3 acc. to DIN EN 60721-3-3 with extended tempera-
ture and humidity range)
Up to 2000 m above sea level
1
Classification acc. to DIN EN 60721-3-3, table 6, class 3M2
Certificate/certifica-
tion number
E201387
14 510-15 HH
2 2
, max. 2.5 mm
2 2
, max. 2.5 mm
2
Inspection basis
UL 61010-1 (3. Ed.),
CAN/CSA-22.2
No. 61010-1 (3. Ed.)
GL type approval
guidelines, VI-7-1
(Ed. 2007),
VI-7-2 (Ed. 2012)
Environmental cate-
gory C, EMC1
Valid for
all types
all types;
a power supply unit
with GL type approval
is required (e.g. type
705090)