JUMO mTRON T Operating Manual page 64

6 Configuration
Alarm
To open this window, use the "Alarm" button:
Parameters
Parameter
Alarm type 1, 2
?
Limit value 1, 2
Kind of alarm 1, 2 The alarm type is not set by default.
Event text 1, 2
?
Switching differ-
ential
?
Alarm suppress
Alarm delay
64
Selection/settings
Inactive
Min. alarm
Max. alarm
-3.37E+38 to 0 to +3.37E+38
Collective alarm
Event
Use default text or select other text from
the list.
0 to 3.37E+38
Signal to activate the alarm suppression
Inactive
Module (source of signal)
0 to 32767 s
Description
Monitoring is not active
Alarm is issued if the limit value is not
met.
Alarm is issued if the limit value is
exceeded.
Limit value at which an alarm is issued.
Alarm is used to form the collective
alarm.
Alarm results in an entry (event text) in
the event list.
Text that is entered in the event list for
an alarm (for "Event" alarm type).
Used to suppress constant switching
operations in the event of minor fluctua-
tions of the input signal around the limit
value.
No alarm suppression
Alarm suppression by a signal (high
active) that must be selected in the fol-
lowing field (digital selector).
Delay time for alarm activation