Enabling Of Extra Codes - JUMO mTRON T Operating Manual

10.3

Enabling of extra codes

Setup dialog
Parameters
Parameter
Generate code
number
Enter enable
code
Reset extra
codes
Selection/settings
To generate a code number, click the
function to select it and then click the
"Next" button. Further instructions are
then given.
To enter an enable code, click the func-
tion to select it and then click the "Next"
button. Further instructions are then
given.
To reset extra code, click the function to
select it and then click the "Next" button.
Further instructions are then given.
10 Online parameters
Description
This function is used to generate a code
number to enable extra code. The code
number is required to obtain an enable
code from a sales partner.
This function is used to enable extra
code. This requires the enable code
received from the sales partner.
This function can be used to lock extra
code that has been enabled.
Locked extra code can only be activated
by re-enabling. This procedure is sub-
ject to charge!
153