Parts And Module Replacement; Equipment Needed - Christie Captiva DHD400S Service Manual

Parts and Module
Replacement
NON-INSULATED DANGEROUS VOLTAGES MAY BE EXPOSED! Always power down and
disconnect/disengage all power sources to the projector before servicing or cleaning.
OBSERVE ALL ELECTROSTATIC PRECAUTIONS! Use a grounded wrist strap when handling
electronic assemblies.
CHRISTIE ACCREDITED SERVICE TECHNICIANS REQUIRED! All module replacement
procedures must be performed by qualified service technicians.

Equipment Needed

• Screw Bit (+): 105
• Screw Bit (+): 107
• Hex Sleeves 5 mm
• Projector
Captiva Service Manual
020-000867-03 Rev. 1 (05-2018)
30