Reset Bridge; Factory Default; Tcp/Ip Settings - SMC Networks EZ Connect SMC2682W User Manual

S C
YSTEM ONFIGURATION

Reset Bridge

Use this button to reset the AP/Bridge. Note that you will have to re-enter
the password to regain management access to this device.

Factory Default

Use this button to load the factory default configuration and reboot this
device. Note that all user-configured information will be lost. You will also
have to re-enter the password to regain management access to this device.

TCP/IP Settings

This page allows you to review and change the network settings on the
AP/Bridge.
20