Snmp Commands; Table 14: Snmp Commands - SMC Networks E21011 User Manual

17
SNMP C
OMMANDS
Controls access to this access point from management stations using the
Simple Network Management Protocol (SNMP), as well as the hosts that
will receive trap messages.

Table 14: SNMP Commands

Command Function
snmp-server community Sets up the community access string to permit
access to SNMP commands
snmp-server contact Sets the system contact string
snmp-server location Sets the system location string
snmp-server enable Enables SNMP service and traps
server
snmp-server host Specifies the recipient of an SNMP notification
operation
snmp-server trap Enables specific SNMP notifications
snmp-server vacm view Configures the VACM view
snmp-server vacm group Configures the VACM group
snmp-server user Sets the name of the SNMP v3 user
snmp-server target Configures SNMP v3 notification targets
snmp-server filter Configures SNMP v3 notification filters
show snmp vacm group Displays the VACM group
show snmp vacm view Displays VACM views
show snmp users Displays SNMP v3 user settings
show snmp target Displays the SNMP v3 notification targets
show snmp filter Displays the SNMP v3 notification filters
show snmp Displays the status of SNMP communications
– 148 –
Mode Page
GC 149
GC 149
GC 150
GC 150
GC 151
GC 152
GC 153
GC 154
GC 155
GC 156
GC 157
Exec 160
Exec 160
Exec 158
Exec 158
Exec 159
Exec 159