Vtp Pruning - Cisco Catalyst 4500 Series Configuration Manual

vtp pruning

vtp pruning
To enable pruning in the VLAN database, use the vtp pruning command. To disable pruning in the
VLAN database, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default Disabled
Command Modes VLAN configuration mode
Command History Release
12.1(8a)EW
Usage Guidelines VTP pruning causes information about each pruning-eligible VLAN to be removed from VTP updates
if there are no stations belonging to that VLAN.
Examples The following example shows how to enable pruning in the VLAN database:
Switch(vlan-config)# vtp pruning
Pruning switched ON
Switch(vlan-config)#
The following example shows how to disable pruning in the VLAN database:
Switch(vlan-config)# no vtp pruning
Pruning switched OFF
Switch(vlan-config)#
Related Commands Command
show vtp
vtp (global configuration
mode)
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-1188
vtp pruning
no vtp pruning
Modification
This command was introduced on the Catalyst 4500 series switch.
Description
Displays VTP statistics and domain information.
Configures the name of a VTP configuration storage file.
Chapter 2