Configuring A List Of Ipv6 Destination Ip Addresses For An Ace - Avaya ERS 8800 series Configuration Manual

Procedure steps
1. In the navigation tree, open the following folders:Configuration, Security, Data
2. Double-click Advanced Filters (ACE/ACLs).
3. Click the ACL tab.
4. Select an IPv6 ACL.
5. Click ACE.
6. From the ACE Common tab, select an ACE.
7. ClickIPv6.
8. Click Insert.
9. Specify the operation (the only option is eq [equals]) and the IPv6 addresses.
10. Click Insert.
Variable definitions
Use the data in the following table to configure the Source Address tab.
AclId
AceId
Oper
List
Configuring a list of IPv6 destination IP addresses for an
ACE
Configure an ACE IPv6 destination address to have the filter look for a specific IPv6 destination
address.
Prerequisites
• The associated ACL packet type must be IPv6.
• The associated ACT IPv6 attributes must be dstIpv6.
Configuration — IPv6 Routing
Path.
Variable

Configuring a list of IPv6 destination IP addresses for an ACE

Value
Specifies the ACL ID.
Specifies the ACE ID.
Specifies the ACE operation. The only option is eq
(equals).
Specifies the IPv6 addresses—a binary string of 16
octets in network byte-order. Enter a single IPv6
address, range of IPv6 addresses, or multiple IPv6
addresses.
November 2010 317