Avaya ERS 8800 series Configuration Manual page 286

IPv4-to-IPv6 transition mechanism configuration using the ACLI
retransmit-interval <seconds>
transit-delay <seconds>
tunnel-id
286 Configuration — IPv6 Routing
Variable
is used only during election of the designated router
and backup designated router.
value is in the range 0–255. The default is 1.
To set this option to the default value, use the default
operator with the command.
Configures the retransmit interval for the OSPF
interface; the number of seconds between link-state
advertisement retransmissions.
seconds is an integer between 1–1800.
To set this option to the default value, use the
default operator with the command.
The default value is 5.
Configures the transit delay time for the OSPF
interface, the estimated time in seconds required to
transmit a link-state update packet over the interface.
seconds is an integer between 1–1800.
To set this option to the default value, use the default
operator with the command.
The default value is 1.
Specifies the ID number of the tunnel in the range of
1-5000.
Value
November 2010