Avaya ERS 8800 series Configuration Manual page 256

IPv6 RSMLT configuration using Enterprise Device Manager
Procedure steps
1. In the navigation tree, open the following folders: Configuration, IPv6.
2. Double-click RSMLT.
3. Click the Edge Peer tab.
Variable definitions
Use the data in the following table to view IPv6 RSMLT-edge information.
Parameter
PeerVlanId
PeerIpv6Address
PeerIpv6PrefixLength
PeerMacAddress
PeerVrfId
PeerVrfName
PeerlsRaPrefix
PeerConfType
PeerNoAdvertise
PeerOspf6Advertise
PeerPrefCandidate
PeerPfxValidLife
PeerPfxPrefLife
PeerPfxOnLinkFlag
PeerPfxAutoFlag
256 Configuration — IPv6 Routing
The ID of the VLAN associated with this entry
The IPv6 address of the peer RSMLT interface.
Peer IPv6 address prefix.
The peer MAC address.
Identifies the Peer VRF.
The Peer VRF name.
True if this is a Router Advertisement prefix, False if this is a
global address.
Type of configured address, passed opaquely to Infinity.
True if advertisement of this prefix is disabled, passed opaquely
to Infinity.
True if OSPFv3 advertisement of this prefix is enabled, passed
opaquely to Infinity.
True if address is considered for preferred selection, passed
opaquely to Infinity.
Valid lifetime in seconds, passed opaquely to Infinity.
Preferred lifetime in seconds, passed opaquely to Infinity.
If set then this prefix can be used for onlink determination,
passed opaquely to Infinity.
If set then this prefix can be used for address autoconfig,
passed opaquely to Infinity.
Description
November 2010