IPv6 routing configuration using Enterprise Device Manager
Variable definitions
Use the data in the following table to configure the route redistribution.
Variable
DstVrfId
Protocol
SrcVrfId
RouteSource
Enable
154
Configuration — IPv6 Routing
Specifies the ID of the destination virtual router and forwarder (VRF).
Specifies any one of the dynamic routing protocols, which is interested
in receiving the external routing info.
Specifies the ID of the source VRF.
Select the route source protocol for the redistribution entry.
Enable (or disable) an OSPF redistribution entry for a specified source
type.
You can also enable or disable this feature in the OSPF Redistribute tab
of the Policy dialog box by clicking in the field and selecting enable or
disable from the menu.
Value
November 2010