CLI show commands
Enter the following command to view the MLD cache for a brouter port:
show ipv6 mld mld-cache port <slot/port> detail
Enter the following command to view the MLD cache for a VLAN:
show ipv6 mld mld-cache vlan <vlan id> detail
Enter the following command to view the MLD cache for a group address:
show ipv6 mld mld-cache grp-address <address> detail
MLD configuration for a brouter port
Use the show ports info mld command to display configuration details for MLD on a
brouter port. The syntax for this command is as follows.
show ports info mld
The following figure shows sample output for this command.
Figure 32: show ports info mld command output
MLD configuration for a VLAN
Use the show vlan info mld command to display configuration details for MLD on a VLAN.
The syntax for this command is as follows.
show vlan info mld
386
Configuration — IPv6 Routing
November 2010