Avaya ERS 8800 series Configuration Manual page 355

Variable
IfIndex
Rtrld
Address
Options
Priority
State
Events
LSRetransQLen
HelloSuppressed
NbrIfid
RestartHelperStatus
Configuration — IPv6 Routing
A read-only field indicating the local link ID of the link over
which the neighbor is reached.
A read-only field indicating the router ID of the neighboring
router, which in OSPF uses the same format as an IPv6
address but identifies the router independent of IPv6 address.
A read-only field indicating the IPv6 address for the neighbor
associated with the local link.
A read-only field indicating the bit mask corresponding to the
options field on the neighbor.
A read-only field indicating the preferential treatment
assignment, which places the transmitted packets into queues.
The priority field also indicates the possible selection of the
priority field in the data link header when the switch forwards
the packet.
A read-only field indicating the OSPF interface state:
• down
• attempt
• init
• twoWay
• exchangeStart
• exchange
• loading
• full
A read-only field indicating the number of state changes or
error events occurring between the OSPF router and the
neighbor router.
A read-only field indicating the number of elapsed seconds
between advertising retransmissions of the same packet to a
neighbor.
A read-only field indicating whether hellos are suppressed at a
neighbor.
A read-only field indicating the interface ID that the neighbor
advertises in hello packets on this link; that is, the neighbor
local interface index.
A read-only field indicating that the router is a hitless restart
helper for the neighbor,
• notHelping
• helping
Viewing OSPF neighbor information
Value
November 2010 355