Avaya ERS 8800 series Configuration Manual page 248

IPv6 VRRP configuration using the ACLI
Parameter
STATE
CONTROL
PRIO
ADV
MASTER
UP TIME
CRITICAL IPv6
CRITICAL IPv6
(ENABLED)
BACKUP-MASTER
BACKUP-MASTER STATE Indicates the backup master state.
FAST ADV
FAST ADV (ENABLED)
ACCEPT MODE
248 Configuration — IPv6 Routing
Indicates the current state of the virtual router.
• initialize—waiting for a startup event
• backup—monitoring the state or availability of the master
router
• master—forwarding IPv6 addresses associated with this
virtual router.
Indicates the virtual router function. Set the value to enabled
to transition the state of the router from initialize to backup. Set
the value to disabled to transition the router from master or
backup to initialize.
Indicates the priority for the virtual router (for example, master
election) with respect to other virtual routers that are backing
up one or more associated IPv6 addresses. Higher values
indicate higher priority.
A priority of 0, which you cannot set, indicates that this router
has stopped participating in VRRP and a backup virtual router
transitions to become the new master.
A priority of 255 is used for the router that owns the associated
IPv6 addresses.
Indicates the Advertisement Interval, in milliseconds, between
sending advertisement messages.
Indicates the master router real (primary) IPv6 address. This
is the IPv6 address listed as the source in the VRRP
advertisement last received by this virtual router.
Indicates the time interval (in hundredths of a second) since
this virtual router was initialized.
Indicates the IPv6 address of the interface that causes a
shutdown event.
Indicates if the critical IPv6 address is enabled.
Indicates the backup master IPv6 address.
Indicates the Fast Advertisement Interval, in milliseconds,
between sending advertisement messages. When the Fast
Advertisement Interval is enabled, the Fast Advertisement
Interval is used instead of the regular advertisement interval.
Indicates the state of fast advertisement.
Controls whether a master router accepts packets addressed
to the address owner's IPv6 address as its own if it is not the
IPv6 address owner. The default value is disable.
Description
November 2010