IPv6 VRRP configuration using the ACLI
Prerequisites
Access privExec Configuration Mode.
Procedure steps
Show the extended VRRP configuration for all VLANs on the switch or for the specified
VLAN by using the following command: show ipv6 vrrp interface <port-
type> [<1-4094>] [<portList>] vlan [<1-4094>] [<portList>] vrid
<1-255> [statistics] [verbose]
Variable definitions
Use the data in the following table to use the show ipv6 vrrp interface command.
<port-type> [<1-4094>]
[<portList>]
vlan [<1-4094>] [<portList>]
vrid <1-255>
statistics
verbose
Job aid
The following table shows the field descriptions for the show ipv6 vrrp interface
command.
Parameter
VLAN ID
PORT NUM
VRRP ID
IPv6 ADDRESS
244
Configuration — IPv6 Routing
Variable
Displays information by port type, and optionally by
specified VLAN ID and ports.
Displays information by VLAN, and optionally by specified
VLAN ID and ports.
Displays information by virtual router ID.
Displays VRRP statistics for the interface.
Displays extended information.
Indicates the VLAN ID.
Indicates the port number.
Indicates the virtual router ID on a VRRP router.
Indicates the assigned IPv6 addresses that a virtual router
backs up.
Value
Description
November 2010