IPv6 routing configuration using the CLI
disable
enable
info
Configuring OSPF static redistribution
Enable or disable static redistribution to obtain information about redistributing IPv6 static
routes into an OSPFv3 routing domain.
Procedure steps
Configure OSPF static redistribution by using the following command:
config ipv6 ospf redistribute static
Variable definitions
Use the data in the following table to use the config ipv6 ospf redistribute static
command.
disable
enable
info
Configuring port-based OSPF parameters
Configure port-based OSPFv3 parameters to customize your OSPF IPv6 configuration.
168
Configuration — IPv6 Routing
Variable
Variable
Disables an OSPF direct redistribution policy. The
default value is disable.
Enables an OSPF direct redistribution policy.
Displays information about the OSPF direct
redistribution policy settings.
Disables an OSPF static redistribution policy. The
default value is disable.
Enables an OSPF static redistribution policy.
Displays information about the OSPF static
redistribution policy settings.
Value
Value
November 2010