Avaya ERS 8800 series Configuration Manual page 92

Basic IPv6 configuration using Enterprise Device Manager
Variable definitions
Use the data in the following table to configure the discovery prefix.
Variable
IfIndex
Prefix
PrefixLen
VlanId
UseDefaultVal
ValidLife
PreferredLife
Infinite
OnLinkFlag
AutoFlag
AddressEui
NoAdvertise
92 Configuration — IPv6 Routing
A read-only value indicating the unique value to identify an IPv6 interface.
For the brouter port, it is the ifindex of the port and, in the case of the
VLAN, it is the ifindex of the VLAN.
Configures the prefix to create an IPv6 address in the IPv6 interface table.
Configures the mask to create an IPv6 prefix entry as either advertised
or suppressed.
Specifies the VLAN ID of the IPv6 interface.
Select one of the values to set its value to default value. This is a bitmask
field, setting all the bits means that all the options will be reverted to
default values.
Configures the valid lifetime in seconds that indicates the length of time
this prefix is advertised. The default is 2592000.
Configures the preferred lifetime in seconds that indicates the length of
time this prefix is advertised. The default value is 604800.
Configures the prefix valid lifetime so it never expires. The default is false.
Configures the prefix for use when determining if a node is onlink. This
value is placed in the L-bit field in the prefix information option. It is a 1-
bit flag. The default is true.
Configures the prefix for use as the autonomous address configuration.
This value is placed in the autoflag field in the prefix information option.
It is a 1-bit flag. The default is true.
Configures the EUI address. Use an EUI-64 interface ID in the low-
order 64-bits of the address when the ID is not specified in the address
field. If enabled, use EUI, or use EUI-64 and the complement Universal/
Local (U/L) bit. This operation provides for both global and link-local
addresses. After you create the entry, you cannot modify this value. This
value is valid for use only when the PrefixLength is 64 or less. The default
is eui-not-used.
Select true to not include the prefix in the neighbor advertisement. The
default is false.
Value
November 2010