Chapter 26: IPv6 traffic filter configuration
This chapter describes how to configure and manage traffic filters for R and RS modules on the Avaya
Ethernet Routing Switch 8800/8600 with Enterprise Device Manager. Specifically, it provides configuration
instructions for advanced filtering features using the appropriate options under Security, Data Path,
Advanced Filters (ACE/ACLs ) on the main Enterprise Device Manager menu. For conceptual information
about IP filters, see
IPv6 routing fundamentals
For additional information about IPv4 filters, see Avaya Ethernet Routing Switch 8800/8600 Configuration
— QoS and IP Filtering for R and RS Modules, NN46205-507.
This module describes how to use Enterprise Device Manager to configure and manage traffic filters for
R and RS modules on the Avaya Ethernet Routing Switch 8800/8600. Specifically, it provides configuration
instructions for advanced filtering features using that option under Security on the main Enterprise Device
Manager menu.
IPv6 traffic filter configuration navigation
•
Configuring an ACT
•
Modifying ACT attributes
•
Inserting a pattern in an ACT
•
Inserting an ACL
•
Modifying an ACL
•
Inserting ACE common entries
•
Modifying ACE common entries
•
Configuring a list of IPv6 source IP addresses for an ACE
•
Configuring a list of IPv6 destination IP addresses for an ACE
•
Configuring an IPv6 next header rule for an ACE
•
Deleting an ACT
•
Deleting an ACL
•
Deleting ACE common entries
Configuration — IPv6 Routing
using Enterprise Device
Manager
on page 17.
on page 308
on page 309
on page 310
on page 311
on page 313
on page 314
on page 316
on page 319
on page 320
on page 320
on page 316
on page 317
on page 318
November 2010
307