Viewing Tcp And Udp Information - Avaya ERS 8800 series Configuration Manual

Common procedures using Enterprise Device Manager
Variable
RestartHelperAge
RestartHelperExitReason

Viewing TCP and UDP information

View TCP and UDP information to view the current configuration.
Procedure steps
1. In the navigation tree, open the following folders:Configuration, IPv6.
2. Double-click TCP/UDP.
3. Select the required tab:
Variable definitions
Use the data in the following table to use the TCP/UDP tabs.
TCP Globals tab
RtoAlgorithm
356 Configuration — IPv6 Routing
A read-only field indicating the time remaining in current OSPF
hitless restart interval, if the router acts as a restart helper for
the neighbor. The range is 1 through 1800 seconds.
A read-only field indicating the outcome of the last attempt to
act as a hitless restart helper for the neighbor,
• none indicates no restart was attempted (default)
• inProgress indicates a restart attempt is currently underway
• completed indicates a completed restart
• timedout indicates a timed-out restart
• topologyChanged indicates a cancelled restart due to the
topology change
• TCP Globals
• TCP Connections
• TCP Listeners
• UDP Endpoints
Variable
Value
Value
Determines the timeout value used for
retransmitting unacknowledged octets.
November 2010