Triggers For Automatic Update - AudioCodes Mediant 1000B User Manual

User's Manual
File Type
CLI Script file
CLI Startup Script file
CMP file based on timestamp
Voice Prompts (VP) file
User Info file
CMP file
Feature Key file
Call Progress Tone (CPT) file
Prerecorded Tones (PRT) file
CAS file
Dial Plan file
Answering Machine Detection (AMD)
file
SSL/TLS Private Key file
SSL/TLS Root Certificate file
SSL/TLS Certificate file

47.2.5 Triggers for Automatic Update

The Automatic Update feature can be triggered by the following:

Upon device startup (reset or power up). To disable this trigger, run the following CLI
command:
(config-system)# automatic-update
(automatic-update)# run-on-reboot off

Periodically:
•
Specified time of day (e.g., 18:00), configured by the ini file parameter
AutoUpdatePredefinedTime or CLI command configure system > automatic-
update > predefined-time.
•
Interval between Automatic Updates (e.g., every 60 minutes), configured by the
ini file parameter AutoUpdateFrequency or CLI command configure system >
automatic-update > update-frequency.

Centralized provisioning server request:
•
Upon receipt of an SNMP request from the provisioning server.
Version 7.2
Keywords for
Template File
cli cliScript.txt
clis cliStartupScript.txt
acmp autoFirmware.cmp
vp vp.dat
usrinf userInfo.txt
cmp firmware.cmp
fk fk.ini
cpt cpt.dat
prt prt.dat
cas cas.dat
dpln dialPlan.dat
amd amd.dat
pkey.pem
sslp
pkey<ID>.pem (for multi-certificate
system)
root.pem
sslr
root<ID>.pem (for multi-certificate
system)
cert.pem
sslc
cert<ID>.pem (for multi-certificate
system)
837
47. Automatic Provisioning
Value Replacing
<FILE> Placeholder
Mediant 1000B Gateway & E-SBC