Technical Data, Bus Node Cpx-M-Fb35 - Festo CPX-FB33 Manual

A. Technical appendix
A.3

Technical data, bus node CPX-M-FB35

General characteristics CPX-M-FB35
General technical data
Degree of protection through housing
in accordance with IEC/DIN EN 60529,
completely mounted, plug connector inserted or
provided with cover cap
Protection against electric shock
Protection against direct and indirect contact in
accordance with IEC/DIN EN 60204-1
Module code (CPX-specific)
– Remote I/O
– Remote controller
Module identifier (in the PLC, CPX-FMT or
CPX-MMI)
– Remote I/O
– Remote controller
Power supply CPX-M-FB35
Operating voltage/load voltage
Intrinsic current consumption of bus node at
24 V DC
from operating voltage supply for
electronics/sensors (U
Separation
PROFINET interfaces to U
Mains buffering time
Festo P.BE-CPX-PNIO-EN en 1407c English
)
EL/SEN
EL/SEN
See CPX system description P.BE-CPX-SYS-...
IP65/IP67
by means of PELV circuit
(Protected Extra Low Voltage)
217
166
FB35-RIO ProfiNet FOC remote I/O
FB35-RC ProfiNet FOC bus node
See CPX system description P.BE-CPX-SYS-...
typ. 150 mA
(internal electronics)
Galvanically separated through fibre-optic cable
10 ms
A-5