Festo CPX-FB33 Manual page 80

2. Commissioning
2 3
CPX revision
code
of the bus node
Rev 12 ... Rev 18
Rev 20 ... Rev 23
Rev 12 ... Rev 23
Tab. 2/11: Station symbol selection as part of CPX-terminal configuration
with Siemens SIMATIC STEP 7
2-32
Example: With use of a bus node CPX-FB33 – with Rev 14
– in the Remote I/O operating mode, without the addition-
al function "Fast Start-up", open the station symbol CPX
( 1 in Tab. 2/11).
Operating Additional
mode function
of the bus node Fast Start-up
(FSU)
Remote I/O
No
Yes, with FSU CPX FSU Rev 18
Remote I/O
No
Yes, with FSU CPX FSU
Remote controller –
5. Drag the selected station symbol 1 onto the bus line of
the PROFINET-IO system ( 2 in Tab. 2/11).
The CPX terminal is displayed as a symbol ( 3 ) and con-
nected to the bus of the PROFINET-IO system.
1
Station symbol 1
(field device group)
FB33 (M12),
FB34 (RJ45)
CPX Rev 18
CPX
CPX RC
Festo P.BE-CPX-PNIO-EN en 1407c English
FB35 (SCRJ)
CPX-FO Rev 18
CPX-FO FSU Rev 18
CPX-FO
CPX-FO FSU
CPX-RC-FO