Contents and general safety instructions
Festo P.BE-CPX-PNIO-EN en 1407c English
This description includes information about installation and
configuration of the bus node for PROFINET as well as
PROFINET-specific information regarding parameterisation,
commissioning, programming and diagnostics of a CPX ter-
minal in a PROFINET network.
Further information about PROFINET can be obtained in the
Internet:
www.profinet.com
Observe in particular the following data:
–
PROFINET installation guidelines
("PROFINET Installation Guide",
"Installation Guideline PROFINET Part 2...").
General, basic information on PROFINET can be found in the
following document:
–
"PROFINET System Description
Technology and Application".
General basic information about the mode of operation, as-
sembly, installation and commissioning of CPX terminals can
be found in the CPX system description (P.BE-CPX-SYS...).
Information about additional CPX modules can be found in
the description for the respective module.
An overview of the structure of the CPX terminal User Docu-
mentation can be found in the CPX system description
(P.BE-CPX-SYS...).
Product-specific information about the control system (IPC,
PLC or I/O controller) can be found in the manufacturer's
product documentation accompanying the product.
XI