2. Commissioning
2.9
Identification & Maintenance
Festo P.BE-CPX-PNIO-EN en 1407c English
The "Identification and Maintenance" (I&M) function serves
as an electronic rating plate of the bus node and offers uni-
form, manufacturer-independent access to device-specific
online information via the Internet.
Note
To use the I&M function, at least revision status 14
("Rev 14") is required (see rating plate of the bus node). If
a bus node with an earlier version is used, the following
error message is displayed:
Fig. 2/17: I&M error message for bus nodes with revision
status (CPX revisions code) earlier than "Rev 14"
2-61